The steering knuckle is one of the important parts in the steering axle of the car, which can make the car run stably and sensitively transmit the driving direction. The function of the steering knuckle is to transmit and bear the front load of the car, support and drive the front wheel to rotate around the king pin to turn the car. In the driving state of the car, it is subjected to variable impact loads, therefore, it is required to have high strength. The steering knuckle is the hinge for turning the wheels, and is generally fork-shaped. The upper and lower forks have two coaxial holes for installing the kingpin, and the steering knuckle journal is used to install the wheel. The two lugs of the pin hole on the steering knuckle are connected with the fist-shaped parts at both ends of the front axle through the king pin, so that the front wheel can deflect a certain angle around the king pin to turn the car. In order to reduce wear, a bronze bushing is pressed into the steering knuckle pin hole, and the bushing is lubricated by the grease nipple installed on the steering knuckle. In order to make the steering flexible, a bearing is installed between the lower ear of the steering knuckle and the fist part of the front axle. An adjustment pad is also installed between the upper ear of the steering knuckle and the fist-shaped part to adjust the gap therebetween.
OEM NO.:96626338 96626337
Car Fitment:for Model:OPEL ANTARA
Type:Steering Knuckle, Steering Knuckle
Warranty:3 Years, 3years/50,000km
Place of Origin:zhejiang, China
Size:OEM Standard Size
Car Model: ANTARA
Car Make: OPEL
MOQ: 51 sets
Supply Ability: 100000 Pieces per Month
Packaging & Delivery
Packaging Details :Neutral package: inner plastic bag, inner box, carton, and pallet.
Port :SHANGHAI OR NINGBO
Lead Time :